I am hoping I can get some input on this code I keep getting. P1292
So if I start the truck it will idle fine with no issues, hit the fuel and still no issues idles up perfectly fine. Then after putting it in drive I can drive around slowly with no issues as soon as I bring the rpm’s up to about 1600 it will drop down to a limp with no power and throw a P1292 code!
My local dealer is telling me I need to start with changing all 8 injectors(at $800 a piece). I would be fine with getting this done but it just does not make sense to me! How could it idle for a hour with no issues if all 8 injectors are faulty I can can also spike the rpms up to over 3500 in park with no issues.
Also I did a full delete to the truck 2years ago with a mini max tuner, but have had no issues with that.
So if I start the truck it will idle fine with no issues, hit the fuel and still no issues idles up perfectly fine. Then after putting it in drive I can drive around slowly with no issues as soon as I bring the rpm’s up to about 1600 it will drop down to a limp with no power and throw a P1292 code!
My local dealer is telling me I need to start with changing all 8 injectors(at $800 a piece). I would be fine with getting this done but it just does not make sense to me! How could it idle for a hour with no issues if all 8 injectors are faulty I can can also spike the rpms up to over 3500 in park with no issues.
Also I did a full delete to the truck 2years ago with a mini max tuner, but have had no issues with that.
