I have the pinouts courtesy of @djmaguire. Here is both the Dual and Single alternator. You'll have to blow it up a bit to see the pin #'s.

-jokester

 

Thank you, I can make this work, but I'm looking for this diagram in pic below. This one I have is for an 05 but they do not match my wire functions

 

Here's the PCM side for C1381B. Hopefully this is what you need?

-jokester

 

Here's the PCM side for C1381B. Hopefully this is what you need?

View attachment 797200

-jokester

I think that's the connector that handles the TCM side of things.

Here is a pic of the connector I need. 6.0 PCM is mounted in a different truck, if your wondering about it's mounting location.

 

AllDataDIY for $20.00 for a one month subscription and then other plan options too. I have used it on a couple of vehicles so far since July and for me the money spent on that was worth it just having access and to print and do about anything needed.

 

Is your '04 an early or late (ie where is your ICP sensor located)?

 

Later date, ICP sensor is located passanger front valve cover

Dat3d

 

Connector is a 46 pin

 

The pic you posted was for C1381b also (post #3).

The left plug is C1381a

 

I believe these are for the late '04 for C1381a:

 

Interesting, alot of my wires match c1381b. I wonder if they changed the connector ID in 05? Sorry for the confusion.

Thank you for the pin out, you've been very helpful ! Think I'll need to buy the AllDataDIY.

 

Is it possible to get the other two plug pin outs as well? Middle one and right one.

 

The connector ID was never changed. We would have told you it it had been.