I'm going to go out on a limb and say no. Carli has 2 different part numbers for the rear springs for 11-16 and 17-24. Both with 2.5" axle tubes. That tells me that maybe leaf width or eye to eye measurements are different.
I'm not saying that with absolute authority. It's just that they don't have an 11- 24 leaf pack because "something" is different between years.

 

I'm going to go out on a limb and say no. Carli has 2 different part numbers for the rear springs for 11-16 and 17-24. Both with 2.5" axle tubes. That tells me that maybe leaf width or eye to eye measurements are different.
I'm not saying that with absolute authority. It's just that they don't have an 11- 24 leaf pack because "something" is different between years.

Thanks. I’m not to worry about the rear because that could be an easier swap out by the blocks and leaf spring.
I did some digging around and found that 11-24 have the same part number for the track bar bracket. I should be able to reuse that. A arm is where I’m unsure off and the coil springs.

 

A arm? A arms are on IFS trucks..The radius arms are same til 22 I believe. But that's if you've replaced them and want to go back. The rest is different. All you really need to change is springs, trackbar bracket, and pitman arm bracket. Probably a few hundred oem. I would look at buying a front level kit.... You might have to re-secure brake lines if you had extended length lines put on. They might hit somewhere you don't want them to otherwise.

 

Thanks for correcting me. Yes not the an arm but radius arm is what I’m talking about. I’ll do some more research. A local guy once purchase my extra 6in coil springs for his 17+ and told me it fit. So I don’t know.

 

I think I still have a handful of the stock stuff off my 16. I'll check when I'm home.

 

I decided to order the xrf front end rebuild (outer tie rod and ball joint with drag link). Still have to order a pmf adjustable track bar and the hd tie rod bar. Thinking to just keep the truck lifted and find another dually for hotshot.

 

I think I have a stock trac bar bracket still

 

I sold all my stuff on offer up. You won't believe how many people are trying to do 4wd conversions on all sorts of project vehicles around so cal.