PICS ADDED!!!!! As some may remember I had bought new 37s and had them on with the ICON 2.5 and they rubbed very little. I didn't even mess with trimming.Anyway my buddy wanted the tires and I was going to try to sell my truck and make a little money. So he gives me 1300 plus some 35 mud grapps and 37 toyos that were on his about 1/4 to 1/3 tread each for a 20. So I couldn't pass it up since I just payed 1500 for my tires new down at the shop I ork at with no tax at cost. So I sold the grapps for 225 and pretty much have the toyos sold for 200. Well I decided to keep the truck and thought what the heck just order the 38s since they were just 60 more dollars. Well I put all the stuff back on (shocks,2.5 kit, exhaust) and mounted the 38x13.50x20 toyo mts. Before I drove it I just went ahead and took the two push in plastic thing out from the bottom of the inner fender under the door and cut a slice in the piece where it would slide towards the back of the truck about 1.5-2 inches and drilled new holes and pushed them back in and it hasn't rubbed yet except the radius arms which is common on just 35s. I even drove offroad to a little git to gether last night and still haven't heard it touch.I' probably going to go up another 2 inches because I miss having some lift and the 38s are almost to stuffed but I couldn't believe it. Sorry for the long post but just had to share that and hoefully I can get pics tuesday with the truck turning and a little cleaner. I can't believe nobody has tryed this yet which I'm sure someone has done it.That just shows with stock wheels and moving the inner fender a little(20 minute deal) can get some great axle clearance with a big tire and minimal lift. Only on a :icon_ford:
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
