you could take the piece off and have it bent.

or you might be able to buy just the tailpipe piece.

if you dont want a muffler you can find a piece of 4 inch pipe to replace ti as well.

 

Not likely to find someone with a mandrel bender with a 4 inch die.

If I can nail the brand down, I'm hoping I can just order a new rear tailpipe.

 

any true exhaust shop should have a mandrel that can do up to 5' probably be cheaper and less of a headache to leave it to a exhaust shop :thumb:

 

ebay has a 4 inch tailpipe piece for 70 bucks!
diamond eye brand.
it has more of a side exit like you were looking for.
cant beat that!

i just typed in "4 inch tailpipe 7.3"

 

Yep im a dumbass?? Probably not I know of 4 exhaust shops within 10 miles of my house that CAN mandrel bend up to 5" pipe and of you would like their contact info I would be more than happy to share.

 

You give me TWO in the Metro area... And I've worked down there...

Make sure you mention MANDREL Bend...

Just because I know your FOS...

Mandrel Tubing Bender, Exhaust Bender | Baileigh Industrial

Not many exhaust shops can afford a $80,000 machine...

Manual Mandrel Bender HMB-1125 | Baileigh Industrial

Or an $8,000 unit before you even buy the die's for it...

 

Id go the Ebay route, probably your best bet. Unless you can find a shop with a mandrel bender but id almost bet they charge you $50 at least. Catch someone on a good day and it may only cost $5.

Man those are some spendy machines! Kinda curious where my buddy got his, it can do up to 5" but he only has dies up to 4" so works for me. We build DOM cages all day long on it but its great for exhaust also!

 

You wont do it for the joy of proving me wrong...

And yes, I've spent over a year in that area... 4 Fry's Grocery stores.

 

Oh I will for 500$ from your acct. so you must have worked on one my jobsite's, I am a superintendent for Summit Builders

 

LOL... Not likely...

I'm a Super for ESI Construction...

Home | ESI Construction

 

Subscribed.
Everyone loves a good pi$$ing contest

 

I have a mandrel tube bender, but max is 2in I think.


Looks like it may be a MBRP exhaust. Looks like this with a long tip added.

I'm thinking I'll just pull it off and sell it, it drones BAD around 1600-1800 RPM.

 

My wifes Flo-pro is pretty nice, quite too...

You could leave it on there and add an Aeroturbine muffler for less then $200... Add it infront of the existing muffler...

Google the 4040xl, its the one with the resonator.

 

Funny thing is the whistle and "blat" is louder on my stock OBS exhaust (cat removed) than my 2001 with this 4 inch MBRP exhaust. There seems to be more rumble at idle, but I can hear my intake whistle over the exhaust whistle. Just crazy drone. I love the sound of my OBS exhaust.

Does the split shot injectors make the exhaust quieter also?

 

Split shot does most of the work of making it quieter... Once you throw a set of injectors in it, it changes... You can look at some of my videos on Youtube for exhaust tone and overall sound with singles in it.

 

I found that my exhaust got louder and better sounding when I put the 1.15 exhaust housing on.
Could be in my head though

 

Noticed the same thing with a 1.15 housing on the 38R...

 

Got it, must be a combo of the 1.15 housing and single shots that make the OBS exhaust sound better to me.

Gonna try a Diamond Eye with and without muffler. I know those don't tend to drone.

 

Its totally your money... But give the Aeroturbine a try...

 

The clips on Youtube show that to be a real quiet muffler.

Maybe a shortie?

I'll have to cut the muffler that's there out. I tried to get it off this afternoon to flip it around. Plus the stainless that's there is almost impossible to clamp down. It's loose at the downpipe connection, and they tack weld the clamp on. POS system.

Maybe I'll cut it out and add a muffler delete, see if the drone goes away.

 

HOLY CRAP!!! LOL

I paid over $200 for mine back in the day! Of course that was 8+ years ago...LOL

I am getting my brakes done tomorrow in Sherwood, your more then welcome to listen to mine with just a 4040 on it...

Just let me know, not even sure if I am going to go to the job tomorrow.

 

I'd love to, but gonna be at work tomorrow. Unless you want to stop by a fire station all the way over in Beaverton...

 

I know a few of them... I did the Fred Meyer Remodel off 217 years ago, I also built the Orchards Hardware in Tigard last year...

I'll let ya know if I make it over to Beaverton...

 

Very nice!

I may also be heading over to Bend for a weekend in Dec, so I'll hit you up if I do. I appreciate the offer.