What did you BUY FOR your 6.0 today?

Gadgetguru said:

LV? No SP? I know you can use either.

What gear lube did you get? I used Mobil 1 LS 75w-140. LS for Limited Slip. Friction modifiers included.

Nexus 6P with Android N via Tapatalk

Click to expand...

I went with red line. That's what my parts house had. Should be good. I only did the rear for now. I may end up dumping it again soon though. It looked really dirty inside and the magnet on the plug had a literal puck stuck to it. My pinion seal is also starting to leak so I wonder if it was getting low. Good news is the gears looked really good. No adverse wear patterns at all.


Sent from my dumb smartphone

Teachagmech said:

I went with red line. That's what my parts house had. Should be good. I only did the rear for now. I may end up dumping it again soon though. It looked really dirty inside and the magnet on the plug had a literal puck stuck to it. My pinion seal is also starting to leak so I wonder if it was getting low. Good news is the gears looked really good. No adverse wear patterns at all.


Sent from my dumb smartphone

Click to expand...

Gotcha. I have to do the front yet as well.

Nexus 6P with Android N via Tapatalk

I did both diffs recently and both were pretty easy. I did upgrade to the newer cover with stainless hardware on the rear, and used Valvoline 75-140 for LS and have had no issues in the past 1K miles. In the front I just used regular Lucas 80-90 and repainted the cover.

What's the new cover? Where did you guys get it?

Sent from my SM-G925V using Tapatalk

Scooter99 said:

What's the new cover? Where did you guys get it?

Sent from my SM-G925V using Tapatalk

Click to expand...

It's from the 08 model. Aluminum with slight fins. It's a worthwhile mod. Check out sunrise ford parts

20% TO 40% OFF ON FORD OEM PARTS

https://r.tapatalk.com/shareLink?ur...share_tid=262158&share_fid=90776&share_type=t


Sent from my dumb smartphone

2 x 2.5 gallons of Amsoil 5w40, Amsoil EABP100

junior125 said:

2 x 2.5 gallons of Amsoil 5w40, Amsoil EABP100

Click to expand...

Your a dealer for amsoil right? PM me a price on 4 gallons if you don't mind.

Sent from my SM-G900P using Tapatalk

STC kit and exhaust bolts


Sent from my dumb smartphone

15 qts of delo 400 15w-40, oil filter and coolant filter

New gates belt and a couple cans of r-134A


Sent from my dumb smartphone

For my 2wd 04 I got a DJM 3/5 drop kit, used. And a new set of Toyo ST2 305/45/22 tires. Will b nice to finally get this one sitting low and level. And for my 03 I got a hpop. Gonna see if I can get it running before I swap it for a 7.3 and a 6spd manual.

plug for the coolant outlet for the BPD block
coolant filter
oil filter
exhaust setup
exhaust wrap
tie wraps for the exhaust wrap
upper radiator hose
lower radiator hose
hose under the degas bottle

Picked up new wiper blades. Thought they seemed a little small, so I grabbed the 22" instead of OEM spec 20" blades. Turns out I already had 22" blades and should have got 24" blades. Ohwell.

All my wiper blades are at least 2" longer than the book calls for.

I've got a set of 24in blades on mine, the passenger side hangs off ever so slightly but it's fine

Yes I am. The guy I got it from said he didn't get them back when he went back to stock. Going to get it aligned this morning and see if someone in town has something that will work. It definitely needs it. I'll throw some pics up once it's light outside in the "what did u do today" thread.

And that dually is tucking some tire. I wanted to go all the way down but would need a c notch since it was on the bump stops.

Cab bushings, 5" exhaust turbo back, fl2016 filter and 16 quarts of Mobile 1 5W-40 motor oil