I love my powerstop breaksNothing waiting for snow to disappear so I can break in powerstop pads. Kinda hard to do their routine on snow covered roads.
At least my other Ex is getting some serious driving time.![]()
Sent from my SM-S901W using Tapatalk
What did you BUY FOR your 6.0 today?
3741 - 3760 of 3776 Posts
Joined
·
1,704 Posts
Ordered pigtail and ICP sensor for my other Ex (the white one). While using it the last week+ all the symptoms of the ICP having issues (surging/dieing at a stop/ICP voltage at zero until next start/...... ).
Happy to have the red one back on the road - it's my beast, the white one at bone stock is just not the same.
Sent from my SM-S901W using Tapatalk
Happy to have the red one back on the road - it's my beast, the white one at bone stock is just not the same.
Sent from my SM-S901W using Tapatalk
Did you know the harness has a connector that is in an absurd location, it took me two days to take off enough parts just to swap that one connector. If you ever change one out be ready to remove the ac compressor as there is a connector beside it that can't be removed until the compressor is out.
Joined
·
622 Posts
Do you or anyone else have a source for the push pins that hold the wire channel on? Mine are pretty much shot.a few things...eventually will install but right now, just getting stuff together. Ordered the dipstick tube seal and the seal for the trans dipstick tube today. Should be in tomorrow.![]()
You’re talking about the little “christmas trees” I call them? Just about every local auto parts store usually sells them in a small packs and in different sizes and styles. All aftermarket brands of course but will still get the job done
2005 F250 FX4 Lariat CCSB - ARP studs, EGR deleted, IPR coolant filter, PHP FICM tunes.
Joined
·
1,596 Posts
How much was the wire channel? Mine needs replacement.a few things...eventually will install but right now, just getting stuff together. Ordered the dipstick tube seal and the seal for the trans dipstick tube today. Should be in tomorrow.![]()
it was only about $38. Surprisingly inexpensive. Not sure why people neglect replacing it. I thought it was going to be a lot more.
I thought it was unobtainium?
Joined
·
5,034 Posts
Inventory fulfillment comes and goes.
A guy over on FTE was printing out replacement tabs for these.
Or just follow the post.
A guy over on FTE was printing out replacement tabs for these.
Above turbo wiring support thing. - Ford Truck Enthusiasts Forums
6.0L Power Stroke Diesel - Above turbo wiring support thing. - Does anyone know what this part is called? Its the plastic wire harness holder thats above the turbo that you have to flip up to access the turbo. Mine broke and I cant seem to find it on any parts diagram. Any help would be...
www.ford-trucks.com
Above turbo wiring support thing. - Ford Truck Enthusiasts Forums
6.0L Power Stroke Diesel - Above turbo wiring support thing. - Does anyone know what this part is called? Its the plastic wire harness holder thats above the turbo that you have to flip up to access the turbo. Mine broke and I cant seem to find it on any parts diagram. Any help would be...
www.ford-trucks.com
Or just follow the post.
Joined
·
1,704 Posts
Viper alarm with remote start. Gets installed today. The alarm is an added touch, more interested in the remote start for them cold mornings.
![]()
Sent from my SM-S901W using Tapatalk
Sent from my SM-S901W using Tapatalk
Bought a new crankshaft position sensor to go along with the new engine harness I ordered a week ago. Figured if I'm going to be that deep into the engine bay doing the harness, I'm gonna replace this as well just for good measure. Already installed a new Motorcraft CMP sensor Waiting on the callback from my local dealership to confirm it came in. (they show it has, but the parts manager is talking to his shipping and recieving folks to find out where it is). Ordered the harness from the Ford Parts website. List price is over $1200, paid $872 after Cali taxes for it. Bought the Motorcraft CKP sensor off of Amazon for like $30 or so.
Update: Engine harness did in fact come in, picking it up after work today. 8 days from ordering it to my local dealership recieving it.
Update: Engine harness did in fact come in, picking it up after work today. 8 days from ordering it to my local dealership recieving it.
Joined
·
622 Posts
I quit using Amazon for purchases for numerous reasons but that’s one of the big ones. I use them now to find items I want and then source those parts from elsewhere. I might have to pay a bit more but that’s fine by me. I hate giving money to people that hate me and others like me.
Edit: word
2005 F250 FX4 Lariat CCSB - ARP studs, EGR deleted, IPR coolant filter, PHP FICM tunes.
Joined
·
1,596 Posts
Great minds think alike.
Motorcraft packaging looked authentic. Motorcraft and Ford part number on the package matched. Package didn't appear to have been tampered with and the sensor looks correct. Fingers crossed I reckon.
Joined
·
622 Posts
I just bought a set of headlights from bajaretrofits. They are expensive but the other day I was driving into town and my current headlights were a waste of time. The driving lights helped immensely but I really need headlights that put out actual light. So I splurged on these. We will see how much of an improvement they are when they arrive. I will try to take some pictures of the old and the new if I remember to do so. I sometimes get involved and forget about documenting improvements with photos. I expect a huge improvement over the stock lights.
Still waiting on my seat covers from CoverCraft since I had to return the first set due to the wrong type being sent. They were received by CC three weeks ago.
Still waiting on my seat covers from CoverCraft since I had to return the first set due to the wrong type being sent. They were received by CC three weeks ago.
Joined
·
3,348 Posts
2 years Idaho registration
$119.63 for 2 years including 2 years annual park pass and $3.59 processing fee
Not missing commiefornia at this point
Sent from my SM-S901U using Tapatalk
$119.63 for 2 years including 2 years annual park pass and $3.59 processing fee
Not missing commiefornia at this point
Sent from my SM-S901U using Tapatalk
Joined
·
1,704 Posts
Wheel hub assembly for passenger side on front.
One of 3 units left in my vicinity - according to Ford parts gent they are currently unavailable for them to order. Something to do with supply shortage.
Sent from my SM-S901W using Tapatalk
One of 3 units left in my vicinity - according to Ford parts gent they are currently unavailable for them to order. Something to do with supply shortage.
Sent from my SM-S901W using Tapatalk
3741 - 3760 of 3776 Posts
