Ford Powerstroke Diesel Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,654 Posts
You could always get the harness repair kit for it. The kit will have the connector shell pieces to repair the connector and the pin removal tool to remove the pin. Then all you do is push the pins back into the new shell piece.

Valve Cover External Harness Repair Kits (contains 4 hard shells w/seals, w/o pins)
(Ford) F7TZ-14489-BA (94-96) w/o pins
(Ford) F7TZ-14489-AA (97) w/o pins
(International) 1830829C91 w/o pins

Cheers!
 
  • Like
Reactions: Arcturus

·
Registered
Joined
·
3,654 Posts
You can go the "splice-in pigtail" route or use the kit I mentioned previously (along with separately purchased pins) and crimp new pins on for the damaged ones. Part numbers for pins:

Female Pins, no wire lead (International) 1661875C1
Female Pins, with 6” wire lead (International) 2501055C1

Cheers!
 
  • Like
Reactions: CELAYORK
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top