Ford Powerstroke Diesel Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
My turbo stopped building boost so I took off the intake boot and started the truck. The wheel wasn't spinning at all. I turned off the truck and tried to spin it by hand. I could not spin it with my fingers. So I put a 5/8" socket on the wheel and it broke free with very little pressure. Then it seemed to spin fine. I started the truck the wheel now spins and you can hear a faint metallic rubbing sound while it's spinning. What could be the issue?

Update: I checked for end play and there is none. Very minimal up and down play. I started it up again and hit the gas a few times and no more weird noise. This is so weird.
 
1 - 3 of 3 Posts
Top