Ford Powerstroke Diesel Forum banner

Tire and lift question?

836 Views 2 Replies 2 Participants Last post by  winona78
Trying to figure out if these tires plus wheel spacers will work for my set up without rubbing. My lift kit is this one...

1999-2004 Ford F250 / F350 4" lift kit 314H | BDS Suspension

Currently, I am running 295/70R18 and the wheels are 10" wide. This is my clearance at the moment (it is about 2" when the wheel is turned)...

The front tires are pretty low on tread too. I'd guess 5,000 miles left or so.

Anyways, my next set of tires I want are the Nitto Trail Grappler 35x12.50x18 and I also wanted to throw on some 1.25-1.5" wheel spacers on it.

Is there any way I can know that these tires will clear without rubbing? I'd hate to blow 350$ on spacers that are useless.

Thanks in advance!

EDIT: Looks like I need 2" spacers instead... so now any help on clearance with 12.5" wide tires and 2" spacers?
See less See more
1 - 3 of 3 Posts
You'll need 2" spacers/adapters to clear the lugs.

  • Like
Reactions: 1
You'll need 2" spacers/adapters to clear the lugs.

Well that is very good to know. Thanks you
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.