Ford Powerstroke Diesel Forum banner

1 - 4 of 4 Posts

·
Christ Follower
Joined
·
602 Posts
Discussion Starter #1
Have fuel in my overflow so while I'm replacing the injector cups, i've decided to do a few upgrades while im in there.

What i've planed so far is the injector cups and tools from Riffraff, new FU2 chip from PHP to replace my Superchips 1705, new glow plugs, and a new set of 238/100 injectors from Full Force Diesel. Also going to put in a BTS valve body until the future plans come together after the tax returns come

I plan on putting a new turbo (undecided t4 type), bellowed up-pipes, and a full BTS tranny in the spring when the tax returns come in.

Would you change anything? I only ave $3000 to work with.

Thanks
 

·
Other vehicle is an F250
Joined
·
18,320 Posts

·
Registered
Joined
·
1,387 Posts
If you do a t4 turbo you won't need bellowed up pipes, the kits come with new up pipes.
 

·
Registered
Joined
·
8,710 Posts
Kiss your motor goodbuy unless you defuel the hell out of it or put Forged rods in..

Unless you can afforh Forged rods or a new block stick to stage 1's....400+- HP is the point were the rods can and have let go.
 
1 - 4 of 4 Posts
Top