Ford Powerstroke Diesel Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
154 Posts
Simple answer would be.. If you have a issue with A injector and know what one it is.. Pull the valve cover, pull the injector, suck out the oil from cylinder than the oil leaked in from pulling Injector. Clean out the hole(inspect Injector cup while injector pulled) put new orings on new injector installing, dip the injector in oil to lube up orings and install.


Sent from my iPhone using Autoguide
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top