How much without the Motor ?
I mean the full set up except the motor
as motor can be sourced localy to save on shipment
Thank you
EL
I mean the full set up except the motor
as motor can be sourced localy to save on shipment
Thank you
EL
Simple Centrifuge Home build
After reading tons of messages on various forums I decided a centrifuge would be ideal for my filtering/dewatering system. I read trade offs of the pump driven style (Dieselcraft) vs a "real" centrifuge based on components from the guys at Simple Centrifuge
After sitting the fence a bit and hearing that the turnkey system from simplecentrifuge was going to cost $2,200 I decided to jump in and build one myself. I stumbled across Leon Griffin at WVO Designs who shares an open-source design using the simple centrifuge bowl and a welded enclosure.
I decided to spin a version of his design and try to build one as cheaply as possible and more importantly require no welding.
What follows are some pictures and captions detailing my progress.
After sitting the fence a bit and hearing that the turnkey system from simplecentrifuge was going to cost $2,200 I decided to jump in and build one myself. I stumbled across Leon Griffin at WVO Designs who shares an open-source design using the simple centrifuge bowl and a welded enclosure.
I decided to spin a version of his design and try to build one as cheaply as possible and more importantly require no welding.
What follows are some pictures and captions detailing my progress.
1 - 1 of 133 Posts
1 - 1 of 133 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ford Powerstroke Diesel Forum
A forum community dedicated to Ford F-series owners and enthusiasts with a Power Stroke diesel engine. Come join the discussion about performance, bulletproofing, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
