Ford Powerstroke Diesel Forum banner

setting the e brake

732 views 1 reply 2 participants last post by  carpman15 
#1 ·
Hey guys i got my dads 2000 f350 and i was woundering if there is any way to set the e brake right now it dosent hold the truck. I cant find any adjustment any where so any help would be good
thanks
 
#2 ·
if you look on the back side of the wheel on the bottom of the axle tube there is a little rubber plug about 1in long 1/4 in tall pop it out and adjust just like you would a disk brake what i did was leave the brake off adjust till it was tight and coulndt turn the wheel (with it jacked up) then backed it off so it wasnt rubbing when i turned the wheel and did the other side then set and released the brake about 5 times and adjusted again if you need more help just let me know (pm me)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top