Ford Powerstroke Diesel Forum banner

Schrader Valve Size A/C 6.4L Powerstroke Slow leaks after Manifold Connection

2687 Views 5 Replies 5 Participants Last post by  ZMANN
Have myself a self-inflicted problem. Connected a manifold set to my 2009 F250 6.4L A/C system and the schrader valves for both the high and low side will not seat all the way. I have tried the tricks of pushing down and letting it lose in hopes it would seat automatically. Both still have a slow leak. I put the caps back on but need to get those valves replaced ASAP. I need to get the tool that allows me to change the valves without losing the freon. What size are the low and high side schrader valves? 8mm and 10mm? TIA.
  • Like
Reactions: 1
1 - 2 of 6 Posts
Thought I would follow up in case someone else has this issue in the future. The valve cores are 8mm and 10mm. They are referred to as Eaton Schrader valves. So if you ever want to change out valve cores without losing freon the correct tool to get is an Eaton valve core removal tool. Mastercool sales one. They are expensive, but they may save you money on a complete recovery, vacuum and refill job.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.