Ford Powerstroke Diesel Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter #1
Hey guys, got an 03 Eddie Bauer excursion, just wondering if anybody has ever rhino lined the rocker panels and the bumpers. If so, do you have any advice, or recommendations?

Not sure what years have the rocker panels glued on, but some advice on how to remove those would be very helpful.

Cory


Sent from my iPad using Autoguide
 

·
Registered
Joined
·
48 Posts
Rocker panels or fender flares?

I rhino'd the fender flares on my land rover. Mask off with tape and the daily news paper and start painting, after prep of course. I used the rustolem bed liner in a can. Has held up for 1.5yrs so far. I used the same stuff on my f250's running boards and grille.
 

·
Registered
Joined
·
137 Posts
i rock guarded the bottom portion of the body from the front to the back took the back bumper off and front off and got back in there in the nooks and crannies...i used 3m rock guard from napa...really good stuff also did the plastic above front bumper to the grill sanded everything primed everything then painted everything the same color as the truck...then cleared everything..Hoogie
 
1 - 3 of 3 Posts
Top