[6.4PSD]

Wondering if I could hookup some rigid duallys in replacment of my fog lights?
If so what do I need?


Thanks

 

[6.4PSD]

Anyone tried this????

 

[ercwrestr]

I've been wondering the same thing. Any luck on finding out whats needed???

 

[hollywood19]

I don't have an answer, but I would suggest calling Rigid.

I had an issue with missing parts in a Rigid light kit I purchased from a vender. I had already installed the harness and switches on a UTV when I realized the brackets in the box were not the right ones. The vender was not very helpful, as their solution was to take it all back apart and send the entire kit back. Once they received it, they would see if they had another kit in stock to send me.

Needless to say, I really didn't want to tear it all back apart, as I had spent quite a while routing the wiring and securing it in place. I called Rigid directly, and they sent me the missing parts the next day. Needless to say, their customer service was outstanding. I will definitely buy from them again! :thumb:

So although they don't seem to have a specific kit available on their website, they may have seen it done, done it, or have a suggestion as to how to do it. Heck, they may even decide to make a kit available if there seems to be enough interest.

Just my 2 cents....

 

[preston77]

I have 2 D2's in place of my OEM fog lights. I cut the harness that came with the d2's and spliced them into the factory harness. To mount them I cut the factory bracket where the light itself was attached, mounted a piece of flat steel to it with 2 bolts then drilled the hole for the bracket bolt that came with the d2's.

 

[6.4PSD]

Can you tell a big difference with them over your stock fog lights?

 

[hollywood19]

I have 2 D2's in place of my OEM fog lights. I cut the harness that came with the d2's and spliced them into the factory harness. To mount them I cut the factory bracket where the light itself was attached, mounted a piece of flat steel to it with 2 bolts then drilled the hole for the bracket bolt that came with the d2's.

...that would be the shorter and more helpful answer.

Looks like you're not the only one interested...

http://www.powerstroke.org/forum/general-6-7-discussion/488850-anyone-swapped-oem-fog-lights-dually-d2.html

 

[preston77]

Huge difference! Since my headlights are the tinted lenses for now the d2's are by far brighter than my headlights.

 

[drdiesl]

I put D2s on my truck for fogs until got my bumper done they are awesome