Ford Powerstroke Diesel Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
5,534 Posts
Discussion Starter #1
How hard is this? Im not going to have to remove the whole front end of my truck am I? i keep sherding belts. I have thought it was the ac but now it looks like the ten.pully is 1/8-1/4 inch of track with the rest. and the bearings are not sitting flush with the motor. so for 60 bucks i am willing to replace it, just wondering how hard?
 

·
Registered
Joined
·
5,534 Posts
Discussion Starter #2
anyone out there?
 

·
Let's go B's!!!!
Joined
·
6,020 Posts
I'll bump this up for ya.

I've never done the tensioner pulley before. I've done the idler pulley w/no problem before but not that one. You can get the wrenches on it right? I would think it shouldn't be too hard??

Free bump anyway...
 

·
Premium Member
Joined
·
9,603 Posts
very easy. I think there are only 2 or 3 bolts that hold it on. don't have to remove anything except for the belt :thumb:
 

·
Registered
Joined
·
1,462 Posts
I had to replace the tensioner pulley and arm on my 96. It was easy.....about 15-20min.
 

·
Registered
Joined
·
5,534 Posts
Discussion Starter #6
great. thats what i was hoping to hear! thanks guys
 
1 - 6 of 6 Posts
Top