[Stroke4Fun]

Installing new seals in the 10.5" and they come apart in two pieces when removed! so when i reinstall them ( one pc.) do they go on the spindle dry or with some rtv or just a bit of gear oil? Got the spindle clean with some fine emery just dont know if they need lube or sealer?
thanks,
Chris

 

[Stroke4Fun]

Any help out there?

 

[WildStyle]

It pounds into the back of the wheel hub then just lightly lube the inner part that seals to the spindle with a bit of clean oil and install the hub back onto the spindle using the locking nut to press it all together. No need for RTV.

 

[Stroke4Fun]

Thanks just wanted to be sure!

 

[04blackcrewcab]

Make sure you follow the torque procedure for the rear bearings.