Ford Powerstroke Diesel Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
484 Posts
Discussion Starter #1
The other day i was going to town and the ses light come on and i lost a cylinder. but the kicker to this is it was going on and off along with the missing. i get home and let it run to let it come back and try to figure it out what code it was and the truck just went dead and will turn over but will not crank now. already had cps recall performed last year. any ideas
 

·
Registered
Joined
·
553 Posts
no to sure but heres a bump
 

·
Registered
Joined
·
5,370 Posts
:dunno:i dont know. cam sensor:dunno:
 

·
Registered
Joined
·
484 Posts
Discussion Starter #5
no codes that my cheap reader would pull and koeo not sure what that is
 

·
Viking Heavy Diesel
Joined
·
20,739 Posts
I would recommend renting or barrowing a good scanner so you can do a KOEO self test!
 

·
Registered
Joined
·
553 Posts
koeo= Key On Engine ON test
 

·
Registered
Joined
·
138 Posts

·
Registered
Joined
·
484 Posts
Discussion Starter #9
k will try got a buddy with a snapon will post results apreciate the help fellas
 

·
Registered
Joined
·
484 Posts
Discussion Starter #10
ok fellas here is what i come up with on the scanner. p1277, p1293, p1294, p1298, p0603. all i have got to know now is what the 0603 means in the book it says memory error and another says idm failure what do i need to do?
 

·
Registered
Joined
·
484 Posts
Discussion Starter #11
bump for myself here
 

·
Registered
Joined
·
484 Posts
Discussion Starter #12
bump
for
me
 
1 - 15 of 15 Posts
Top