Ford Powerstroke Diesel Forum banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
126 Posts
Discussion Starter #1
I picked up a set of 22x9.5 Dick Cepek Torque rims from a guy Saturday for dirt cheap.. (One of those deals you cant pass up)

Anyway, I was looking at the specs, and its 22x9.5 With B.S. 6.00" ET:+19mm. Wheel spacers are a must? or would 37x13.5's clear on 6" lift? Im just mainly worried about leaf spring rubbing.. But any other pointers would be appreciated.
 

·
Premium Member
Joined
·
126 Posts
Discussion Starter #3
Well im running Moto Metal 951s right now. Dont remember the BS or anything from them but ive got about 1.5-2.5 inches of clearance with 33x12.5x20s off my leafs at full turn... I'm not the smartest when it comes to understanding this back spacing/offset ****.
 

·
Registered
Joined
·
29 Posts
Well with the 6" lift you have a backspace of 4.5" with those 20" 951. So from where it sits now you it would bring it closer to the frame approx. 1.75"

And no worries on understanding it; I do this **** all day long.

Sent from AutoGuide.com Free App
 

·
Premium Member
Joined
·
126 Posts
Discussion Starter #5
So would a 2" wheel spacer make up for the backspace to run those 22x9.5s? Cause i wil have 13.5 wide tires on them.
 

·
Registered
Joined
·
2,400 Posts
99-04 need 4.25~4.5 inch backspace.
05 and up need the 6~6.5 inch backspace.

Karl and his 2003 Souper Doody
 
1 - 8 of 8 Posts
Top