Ford Powerstroke Diesel Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
520 Posts
Discussion Starter #1
I have some number 1 or jp8 fuel left over from my 6.0 I used to mix cause I got it for free is it safe to run this mixed in my 6.4?


2004 f250, dual 5" chrome stacks 285/75/16 at 10 ply, Vivian's looney (awesome) duplicolor spray bed liner on my rockers and fender lip 10" high
 

·
Registered
Joined
·
1,128 Posts
I wouldn't. The HPFP on these engines from everything I've read are some very finicky critters. I've read of problems just using the older 500ppm. sulfur fuel. Sell it to someone with an old tractor if you have a lot.
 

·
Registered
Joined
·
853 Posts
ULSD (ultra low sulfer diesel) number 1 diesel would be ok as long as it is ULSD, but if it's classified as jp8 then NO that will be too high sulfer content and is not compatable with these fuel systems.
as he said, sell it to a local farmer with just slightly older equipement.
 

·
Registered
Joined
·
520 Posts
Discussion Starter #4
That's what I figured just wanted to make sure before I used it thanks for the info


2004 f250, dual 5" chrome stacks 285/75/16 at 10 ply, Vivian's looney (awesome) duplicolor spray bed liner on my rockers and fender lip 10" high
 
1 - 4 of 4 Posts
Top