Ford Powerstroke Diesel Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
7,617 Posts
Also post cranking RPM and cranking battery voltage
 

·
Premium Member
Joined
·
7,617 Posts
What are the conditions in those shots? -- like key on engine off -- not cranking?
 

·
Premium Member
Joined
·
7,617 Posts
need min of 500 psi to fire the injectors
or 3447 kpa

The ICP desired at 0 is not right
also the IPR at 14%

May want to clear that out and try again -- you should see "live" data -- like the IPR changing up to about 40% cranking
 

·
Premium Member
Joined
·
7,617 Posts
I think -- the IPR will not be commanded closed if there is no RPM signal
The RPM signal originates with the crank sensor signal -- you may or may not get a reading on the dash -- but you will get one in ForScan -- so may want to check the harness for damage
 
  • Like
Reactions: bismic
1 - 4 of 4 Posts
Top