Ford Powerstroke Diesel Forum banner

New build

2675 Views 31 Replies 8 Participants Last post by  Racer71
I recently bought a 6.4 and am in the process of putting her back together she’s in pieces right now! I’m doing new radiator, intercooler, thermostats, oil cooler, coolant hoses and radiator support from Mishimoto, fluidamp balancer, new low pressure oil pump and front cover new belts. All new charge pipes air intake coolant filter system from sinister diesel, up pipes, deletes with h&s racing tuner. New seals on turbo. O dawg ported intake new rocker arms with billet bridges and push rods from Rudy’s. Ccv reroute, arp studs new head gaskets. Set of icon series aluminum o-ringed heads from killsdevil maybe a few other small things I’ve forgot. Is there anything else anyone would recommend doing while I’ve got it apart? This is my first 6.4 it’s been a fun little project everything’s been done cab on (without even lifting it) so far!
1 - 2 of 32 Posts
If you aren’t swapping the cam, at least do lifters. My truck had a new pump on it when i got it with two bad cylinders. I ended doing a new pump and bigger injectors just because I was hoping to avoid failure.
With a lift pump it’s pretty easy typically, otherwise hooked to schrader valve until it runs clear.
1 - 2 of 32 Posts