Ford Powerstroke Diesel Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
460 Posts
turbo first....(D-66 will bolt on) then IC, then HPOP, then e-fuel, and with Stage II's, you will need studs and springs......
 

·
Registered
Joined
·
460 Posts

·
Registered
Joined
·
460 Posts
yes I did a fuel bowl delete, used an Aeromotive 13109 :

http://www.amazon.com/gp/offer-listing/B000CFSL1/ref=dp_olp_new?ie=UTF8&condition=new

used the SD pump, W/ a 30 micron pre-filter, and a 10 micron post filter..
filters & bases from :
Wix 33528 & Napa 3528 Fuel Filter: FleetFilter Secure Online Store

bases : Wix 24309 & Napa 4309 Base: FleetFilter Secure Online Store

I also used a Low Oil shutoff switch that you can get from Summit, and a momentary (spring loaded) switch to start the truck with.....

there are good write-ups just use the search function for "E-Fuel" ......
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top