Ford Powerstroke Diesel Forum banner

Measurement needs

1175 Views 1 Reply 2 Participants Last post by  JustinOOO9
Hey guys so I needed to replace my steering pump and didn’t watch any videos so I just winged it and now I made a mistake so somehow I had to remove my drag link and just unscrewed it from the coupling when I put it back together my steering wheel has slop this has been 6 months ago so I can’t go by rust stains can anyone give me a measurement from center of ball joint to center of ball joint on their 6.4 drag link thanks guys
1 - 1 of 2 Posts
Everyone's truck will be different. Different suspension set ups, tire size, alignment etc. Take it to an alignment shop and get it professionally done to address anything else that may not be set correctly.
  • Like
Reactions: 1
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.