Ford Powerstroke Diesel Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
192 Posts
Discussion Starter #1
Does anyone have any experience with the eBay leveling kit from Top Gun Customs? It is machined aluminum with the hardware for only $9.99 + $9.99 shipping. I was curious if anyone here was running it and what their thoughts were.
Thanks-
 

·
Registered
Joined
·
445 Posts
awesome kit, just put one on mine last weekend. It's made very well and easy to install. I recommend it just to save some from the others that are $100+
I also installed 350 blocks in the rear.

 

·
Registered
Joined
·
6,023 Posts
Thanks for the tip on this one for $20 Im all over that!
 

·
Registered
Joined
·
8,710 Posts
You will still need a adj track bar and castor shims....unless you don't care that the axle isn't centered and you have lost most of the limited castor the truck had.
 

·
Registered
Joined
·
445 Posts
You will still need a adj track bar and castor shims....unless you don't care that the axle isn't centered and you have lost most of the limited castor the truck had.
This is true, but as far as spacers go, you can't beat this deal. CnC'd 6061 aluminum block with a hole in it can only vary in quality so much.
 

·
Registered
Joined
·
192 Posts
Discussion Starter #8
Where can I get castor shims and trac bar to complete the kit?
 
1 - 10 of 10 Posts
Top