Ford Powerstroke Diesel Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a set of 20x9 kmc badlands wheels and a standard 7/8 or 22mm socket wont fit in the wheel to install the lugs.I was wondering if anyone has these wheels and knows where to find a socket to fit or maybe even know where I can find a 21mm lug that will fit the studs.
 

·
Registered
Joined
·
931 Posts
Have you tried a non- impact socket.. ThTs what I did with mine. I also put rap of eletrical tape around the socket so it wouldn't chip the coating
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Yeah I've tried that too. I had to grind it down so it would fit. Do you know if someone makes a thin wall socket?
 

·
Registered
Joined
·
109 Posts
You should be able to find a thin walled socket at your local Napa or decent auto parts store...

I bought a set of thinwalls made for wheels once at Checkers long time ago...
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Thanks ill give that a shot.
 

·
Registered
Joined
·
209 Posts
my old truck had wheels with a similar design like that, and they ran the splined gorilla lug nuts, because they are smaller, and the tool is very thin :thumb:
 
1 - 6 of 6 Posts
Top