Ford Powerstroke Diesel Forum banner
1 - 2 of 2 Posts

· John Wood Nut Swinger
Joined
·
3,413 Posts
The pan is 10ft-lb

The valve body is 100in-lb.


Be very careful, most 1/2" torque wrenches only go down to 10ft-lb. There are 12in-lb per ft-lb.
 

· John Wood Nut Swinger
Joined
·
3,413 Posts
John Wood told me 100in-lb when he sent me a new VB. And since he is the one who built the trans, I am going with 100in-lb.

BTW, My ford manual says 90-110in-lb.

And if you have a cork gasket, get a new reusable gasket.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top