Ford Powerstroke Diesel Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
228 Posts
I think the hole is there the gas trucks had pcm s so that all have the hole I swapped my 460 for a stroke a wile back so if you have any questions I might be able to help

Sent from my SCH-I500 using AutoGuide.Com Free App
 

·
Registered
Joined
·
228 Posts
You can use your dash you just have to swap the wiring you clutch should all be the same the accelerator petal and cable will swap for the electronic one

Sent from my SCH-I500 using AutoGuide.Com Free App
 

·
Registered
Joined
·
228 Posts
It's not bad I swapped a.150 cab on a 92 idi and the 460 for the stroke on my 97 the 92 me and a buddy did in a weekend

Sent from my SCH-I500 using AutoGuide.Com Free App
 

·
Registered
Joined
·
228 Posts
I worked on it for a month or so but I was not in a hurry I was still driving the 92 I did oil pan and o rings oil cooler clutch all the goodies wile it was apart

Sent from my SCH-I500 using AutoGuide.Com Free App
 

·
Registered
Joined
·
228 Posts
From what I understand it will not run right if you don't

Sent from my SCH-I500 using AutoGuide.Com Free App
 

·
Registered
Joined
·
228 Posts
If I rember right all the accessory harnesses plug into the dash harness

Sent from my SCH-I500 using AutoGuide.Com Free App
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top