Joined
·
6 Posts
Hello fellow 'strokers, I'm having technical difficulties with my '95 F350.
One week ago, I replaced my fuel bowl (and everything attached to it) when I went to change my fuel filter. There was silver goop at the bottom of it and the heating element had come loose ...there was no way I was putting that back in my truck. She started right up and I let her run for 30 minutes just to be sure she was okay. I went for an hour long test drive in which my truck drove like a dream. When I got home, I let her cool down for 10 minutes or so before I shut her down.
I planned on driving her to work the next morning ...so I started her up and proceeded to begin to drive to work.
Not 30 seconds into my journey, she started sputtering and loosing power ...I took her out of gear and let her sit for a moment ...she was clearly not running right. I limped slowly back home where she just died on me.
Here's where the fun begins.
I checked over all of my work and all was fine.
I replaced my CPS. No difference.
I noticed that nothing was coming out of my tail pipe as she cranked over ...so I checked my maxi fuses. All were okay.
I removed & examined my IDM ...I found minor rust & corrosion on it so I replaced it. No difference.
I am going to replace the Glowplug Relay next ....does anyone have any ideas as far as what my problem may be?
THANK YOU FOR READING THIS!!
One week ago, I replaced my fuel bowl (and everything attached to it) when I went to change my fuel filter. There was silver goop at the bottom of it and the heating element had come loose ...there was no way I was putting that back in my truck. She started right up and I let her run for 30 minutes just to be sure she was okay. I went for an hour long test drive in which my truck drove like a dream. When I got home, I let her cool down for 10 minutes or so before I shut her down.
I planned on driving her to work the next morning ...so I started her up and proceeded to begin to drive to work.
Not 30 seconds into my journey, she started sputtering and loosing power ...I took her out of gear and let her sit for a moment ...she was clearly not running right. I limped slowly back home where she just died on me.
Here's where the fun begins.
I checked over all of my work and all was fine.
I replaced my CPS. No difference.
I noticed that nothing was coming out of my tail pipe as she cranked over ...so I checked my maxi fuses. All were okay.
I removed & examined my IDM ...I found minor rust & corrosion on it so I replaced it. No difference.
I am going to replace the Glowplug Relay next ....does anyone have any ideas as far as what my problem may be?
THANK YOU FOR READING THIS!!