Ford Powerstroke Diesel Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
Can I hardware an h13 plug on my truck to the 9007 harness? Please let me know thanks


Sent from my iPad using AG Free
 

·
Premium Member
Joined
·
1,544 Posts
Can I hardware an h13 plug on my truck to the 9007 harness? Please let me know thanks


Sent from my iPad using AG Free

Autocorrect strikes again! Hard wire (right?). You can via splicing if you want to.
Please contact us via EMAIL ( [email protected] ) for assistance with matching up wiring functions or if you need/want any of the hardware to avoid splicing.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #3
I spliced the wires with diagrams found online, however the high beam only works when pushing the switch forward to lock into the position rather than pulling back to flash. It is the bi-xenon kit


Sent from my iPad using AG Free
 

·
Premium Member
Joined
·
1,544 Posts
I spliced the wires with diagrams found online, however the high beam only works when pushing the switch forward to lock into the position rather than pulling back to flash. It is the bi-xenon kit


Sent from my iPad using AG Free
Can't guarantee what you found online there is going to be correct unfortunately, and it would seem a wire is not in the right place/configuration there by the sound of it.
Please EMAIL ( [email protected] ) us with the wire colors (each side) that you have setup now and we'll help you get that straightened out there!
 
1 - 4 of 4 Posts
Top