Ford Powerstroke Diesel Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
hi guys,
i have an 06 f350sd thats not starting (crank but dosent start) and its giving codes for everysingle injector, i had the injectors tested at a shop and they said they are working good, i tested the voltage of the FICM and it was good, i even tried a different FICM and it didnt fix it, the fuel pump is working good and there is fuel pressure, im not sure what else to check :confused:,

im thinking it might be the ecu because i got the car from an aution (it was a non-runner) and it was missing the ECU, i ordered one from the internet and they supposedly programmed it to the vin and milage of the car, could it be possible that the ECU i got is Bad or that its not programmed right?

any suggestion would be greatly appreciated :)
 

·
Registered
Joined
·
4,914 Posts
Check for combustion gasses in the secondary fuel housing. Pull filter, ficm relay, hfcm fuse, crank it over and see if bubbles come up in the housing.

Sent from my phone that somebody didn't help me get.
 
1 - 2 of 2 Posts
Top