Ford Powerstroke Diesel Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Have a 2003 6.0 had low icp found high pressure pump was faulty installed new one truck cranks up to only 485 icp and ipr goes to 85 percent replaced the icp sensor and ipr also tried disconnect the icp sensor still no start recheck for leak on air check don’t hear any any one have any ideas
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top