Ford Powerstroke Diesel Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
262 Posts
Discussion Starter · #1 ·
had the truck towed in this weekend and finally got to attempt to read the codes yesterday. well the scan tool would not read any codes. i dont think the pcm is putting out information like its suppose too. also when the key is turned foward it sounds like a constant ticking noise. i pulled one of the large fuses out and it stopped. i am thinking my pcm may be burnt up. the truck just died while getting on the highway and would not start.it cranks but will not start.. my question is how much is a new pcm and what else can i check if its not the pcm
 

·
Premium Member
Joined
·
262 Posts
Discussion Starter · #3 ·
yes i have a wait to start light
 

·
Premium Member
Joined
·
262 Posts
Discussion Starter · #5 ·
the batteries are good..

what would cause the scan tool to not read any codes?
 

·
Premium Member
Joined
·
262 Posts
Discussion Starter · #9 ·
alright..ill check all those things as soon as i get off work saturday if its not raining..thanks for the help . ill let yall know how everything turns out
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top