Ford Powerstroke Diesel Forum banner

Driveshaft Dust Boot

6K views 4 replies 4 participants last post by  ZMANN 
#1 ·
2002 F-350 CrewCab 4x4 longbed.

I lost the dust boot off of my slip yoke two piece drive shaft and thought I would share the parts that I used to replace it. All were ordered off of Amazon. if one was a real mechanic, this would be a ten minute job. It took me about 30 minutes.
1. Sunex 212ZUMDL Driveline Socket
2.Ford Driveshaft Yoke Bolts N800594S100 (Pkg of 4 bolts). M12X1.75X27.0
3.Genuine Ford Fluid XG-8 PTFE Lubricant - 3 oz.
4.Spicer 212007X Boot Kit (the number on the boot is 232655)
 

Attachments

See less See more
4
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top