Ford Powerstroke Diesel Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
I just wanted to double check the torque specs i found on the oil filter housing and oil plug because they seemed a little high. The spec on the filter housing was 18pnds and 32 on the oil plug. I thought it was 12 on the filter housing and 20 on the drain plug. Any help and info is greatly appreciated.
 

·
Premium Member
Joined
·
1,011 Posts
oil filter cap is 18 ft/lb
oil pan drain plug is 32 ft/lb.
Personally I don't use a torque wrench, but I've been doing this for over 30 years.
The specs I got are directly from Ford.
 

·
Registered
Joined
·
134 Posts
Discussion Starter · #5 ·
oil filter cap is 18 ft/lb
oil pan drain plug is 32 ft/lb.
Personally I don't use a torque wrench, but I've been doing this for over 30 years.
The specs I got are directly from Ford.
Hey Thanks I really appreciate it
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top