Ford Powerstroke Diesel Forum banner

Chipped Turbo fan blade

3711 Views 24 Replies 12 Participants Last post by  Heavy_GD
I had just put in a new (but used with under 100k miles) turbo in my 06’ 6.0. After test driving it for the first time, I pulled the intake off and noticed the fan blades on the turbo where chewed up like a chew toy after that one drive. Is it safe for me to drive the truck with chipped fan blades? I’m not noticing any driving differences except for slightly higher but not alarming egts. And I believe my mechanic hooked up the oil feed line incorrectly which starved the turbo of oil which caused this to happen yet caused an oil leak on right below the turbo and dripping down both sides of the transmission.
Tire Water Automotive tire Motor vehicle Tread
See less See more
1 - 3 of 25 Posts
I wonder if these threads are related


See less See more
  • Like
Reactions: 1
Do I think someone would buy a junkyard turbo to save a dollar and wipe out the intake with a loose bolt?

Sure
  • Like
Reactions: 4
I think a lot of people mean well and try to save some money. Let's face it, these parts aren't cheap. However, by trying to save some money and not doing any research on the subject at hand, they often times create their own issues and end up spending that money + more on down the line.

-jokester


See less See more
2
  • Like
Reactions: 4
1 - 3 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top