Ford Powerstroke Diesel Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi everybody,
Long time reader first time poster. I have a random problem. While torquing down my valve covers I snapped one of the valve cover bolts deep in the rocker arm box. Now my problem is this it’s the top bolt all the way on the back near the fire wall. I have two options take my angle drill and bolt extractor with little room. Or remove the rocker arm box and do it on the bench. If I remover the box do I have to get new head gaskets as I will be loosening the arp head studs? I have not ran the motor since installing them and am still in the assembly process. The heads and motor surfaces were all machined before installation and the gaskets were new at install. Any help would be greatly appreciated
 
1 - 1 of 1 Posts
Top