Ford Powerstroke Diesel Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4,914 Posts
Discussion Starter #1
Can anyone help me with this. I would like to take mine apart, clean em up and put them back together but do not know how. A how to or some help would be greatly appreciated.
 

·
Powerstroke Junkie
Joined
·
8,308 Posts
Belz,
This goes into lubing the needle bearing and it is a fairly long process. But it will show you how to pull the esof hubs. I soak mine in ATF for about an hour and then reassemble. Never had a problem. Don't believe everything on Guzzles site, he has some bad info along with some good.

Welcome to guzzle's 4x4 Needle Bearing Maintenance Web Page
 

·
Registered
Joined
·
4,914 Posts
Discussion Starter #3
Thanx Kevin. I wanna clean em up and replace the vac solenoid that's giving me problems.


Sent from my portable forum surfing device. :)
 

·
Powerstroke Junkie
Joined
·
8,308 Posts
Well that will get them out for a good cleaning, ain't much to them. Let me know if you need any more help.
 
1 - 4 of 4 Posts
Top