[U477]

I have obtained a basic AIC for my 1997 7.3 but no wiring harness, 91 bucks from the dealer is out of control. I need the pin out for the module so I can make the harness. Can any of you guys help me out with that pinout? In a perfect world I would have the version with the lcd display but the price was right on the basic one.

 

[U477]

Nobody has this info?

 

[superduty4x4]

https://www.fleet.ford.com/truckbbas/non-html/apcm_manual.pdf

Pages 20 and 23.

 

[rolsmojave3]

I think I have a harness lying around if you're interested. Let me check. PM me if interested

 

[U477]

I have the six pin version not the 18 pin. sorry should have been more specific in the original post.

 

[alberta 7.3]

Looking at the connector side of the unit:

-| A B |
-| --- |
-| C D |
-| --- |
-| E F |

A tan/red ignition power connects to white/purple on under dash connector
B no connection
C red/blue data bus connects to tan/orange on under dash connector
D no connection
E white/purple data bus connects to pink/light blue on under dash connector
F black ground connects to black on under dash connector

 

[U477]

thanks

Thank you Bill, with your help my AIC works as designed! 91 bucks :hehe: