Ford Powerstroke Diesel Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
144 Posts
Slave cylinder for the clutch is on the driver's side.

I have an 04 6spd. and the interference is between the starter bulge on the back of the bellhousing, the pass. side spring shackle, and the firewall - at least with the MBRP 3.5" downpipe. It fits, but is within 1/4" or less of all three of these at the same time. Try the MagnaFlow 17927, it's what I'd try if/when doing it over.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top