We had a couple of warmer days and I noticed my A/C was working intermittently. It works at idle, but any rpm up to 2K and it will start cycling on and off every 5-7sec. At 2k it will stay running longer up to 2 min before it cycles as long as the fan is on high and the A/C is set to max. I put my gauge set on it and found the following. The temp was 70 deg. with low humidity and the truck hadn't been run for several hours. All readings were taken with the A/C set to max, the doors closed and the fan on high.
Static Low 87 High 92
Idle Low 35 High 140
On Low 20 High 160 *the compressor cycles on and off every 5 sec
Off Low 40 High 70 *this is the pressure the system returns to before cycling again
If I leave the A/C on max with the fan on high and stay above 2K the compressor will run for 2 min before getting below 20 and cycling off. If I turn the fan down and keep the rpm the same the low press. will drop below 20 quickly and the compressor will start cycling. Any lower rpm and as soon as the compressor kicks in the press drops within a couple of sec below 20. Any help is appreciated