Ford Powerstroke Diesel Forum banner

'99 F-250 SD 295/75r16

2877 Views 1 Reply 2 Participants Last post by  FuturePharmD
I know this has been asked and answered, but each truck is unique with wheels and lifts and such.

I have a '99 F-250 SD 4x4 7.3 bone stock. The wheels are the 16x7 "honeycomb"or "phone dial" style wheels. I am looking to keep the stock wheels and run 295/75r16 AT's on the truck. Anybody do this without rubbing the leafs?

I am also going to be adding a 2.5" front leveling kit if that may help with the rubbing.

Any help on if these tires will work, would be appreciated. Thanks.

1 - 1 of 2 Posts
I have an 02 and ran 305/70r16 with a 2.5" leveling kit that I ran on stock wheels for a bit until I picked up some dick cepek wheels. I never had any issue with rubbing even at full lock. I went with 305 because it seems at 315 people started running into rubbing issues.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.