[turbotony]

truck threw these codes
P006B
P2563
P0087
U3F25


its -30 truck wouldn't start. got it in a warm garage to let it thaw and began to drain the water separator on the frame rail after a hour and a half of sitting. I drained 1/2 gallon of crap out of it and let it run. the check engine light then went out. I drove it for about an hour and the check engine light came on with this code

P2536

I popped the hood to find coolant all over my reservoir. My boost seemed a little higher than normal also. one of those codes are for the EBP sensor witch I replaced 2 days ago! WHAT DO I DO PLEASE HELP!!!

 

[turbotony]

yeah its deleted. as soon as I got it to thaw out those codes went away. the p2536 came on and I saw the coolant after I popped the hood. that is what I thought at first but that reservoir is still pressurized.

 

[turbotony]

condensation will build up that bad in the uppipe? and im just going off what a ford tech said. I have haven't had that happen yet (knock on would) would to much boost deal with anything with that coolant leak out of the top of that reservoir?