[cjchico4]

Hi all. Recently got a 2013 6.7. It already has LED headlights and fog lights (came with halogens stock, though). I was going to buy LED's for the turn signals, tail lights, and cab lights. For the turn signals, does anyone know if these trucks are CAN-Bus and work with can bus bulbs?

I do have a warning message on the dash when a bulb is out with traditional bulbs. I know you can disable the warnings with Forscan, but I'd rather just buy the can bus bulbs if these trucks support them.

Thanks in advance!

 

[HeavyAssault]

They should work just fine as they are designed to have the correct resistance so the "burnt bulb" alert does not activate.

 

[The Evil Twin]

I'd rather just buy the can bus bulbs if these trucks support them.

Thanks in advance!

It is not a matter of the truck "supporting" the bulbs. A CANbus bulb will work in a 1965 IHC Scout. It just wants 6-16vdc to fire the driver (circuit board). The CANbus bulbs just don't interfere with the light-out message.
In short, no reason not to buy them.