Ford Powerstroke Diesel Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
i have a 04 6.o stroker, wont start.. changed lpop, icp, oil filter, checked all connections, good batteries, got fuel, got 48v koeo ficm, 47.8 volts when cranking, all 8 low circuit injector codes, ??/ got 9,000 kpa when cranking, is that enough oil psi?? some help me.. thanks
 

·
Premium Member
Joined
·
5,700 Posts
Your FICM is probably still bad. Voltage doesn't mean anything if it's not getting to the injectors and there's more than one way a FICM can fail
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
ok, so the ficm can still be bad even though voltage is right?, is there a way i can test it another way or check for issues before i spend the $$ for another one?
 
1 - 4 of 4 Posts
Top