Ford Powerstroke Diesel Forum banner
1 - 1 of 1 Posts

2013 Ford F-250 6.7 Lariat
289 Posts
Discussion Starter · #1 ·
This might be confusing, but here we go:

I have 08+ mirrors on my 6.0 that I put on a few years ago. Got them off eBay. I recently bought a set of 08+ mirror caps from ebay and got them paint matched. Come to find out that they are different from my current ones. The only difference is the clips (if u wanna call them that) are a tiny bit shorter on the painted ones than my current ones. This means the clip in the mirror won't snap over them and hold the caps in place.

What can I do here to make these caps stay on?

I have attached some pictures so you can get a better idea.

Thanks in advance!

Automotive exterior Soil Mobile phone
Bumper Auto part Fender
Tire Auto part Automotive tire Automotive wheel system Automotive exterior
Automotive exterior Bumper Auto part Vehicle
Automotive exterior Bumper Auto part Vehicle Car
Automotive exterior Bumper Vehicle Car Auto part
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.