Ford Powerstroke Diesel Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
502 Posts
Discussion Starter #1
Helping my my buddy figure this out, Hes got an 250 with a 6" lift on it. Wants to bring it back to stock height and trying to figure out what he needs to get. Know that he needs to get new front springs and shocks, and in the back get new u-bolts and blocks. Anything else im missing? I would take a picure of the lift, but his truck isn't here. Any input helps
 

·
Premium Member
Joined
·
31,729 Posts
Is the OEM track bar on the truck?
 

·
Registered
Joined
·
502 Posts
Discussion Starter #3
Couldnt tellya, only looked at the truck for a second
 

·
Registered
Joined
·
603 Posts
Will probably need the stock pitman arm for the steering box. Don't forget to remove the shims out of carrier bearing as well.
 

·
Registered
Joined
·
14 Posts
look online for the brand lift he has to see what all was swapped, im sure it will need pitman arm, stock trac bar mount, remove carrier shim, radius arm drops, brake lines or drop brackets, springs shocks and blocks maybe even add a leaf
 
1 - 5 of 5 Posts
Top