Ford Powerstroke Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. 94-98 7.3L Problem Forum
    I have a 1995 7.3 psd with a 5 speed and I have a problem where sometimes it will stall out and not start unless I hold it above idle other than that it will die. Sometimes it lopes and the CEL will come on when I start it for about a minute and when it’s on it has zero power. When going 60 and...
  2. Builds & Projects
    Hi I believe this is the right forum anyways I have a 97 powerstroke and I got a deal on a zf5 and all the parts to do a swap my question for everyone here is is there anyplace I can get the clutch fork boot and boots for the shifter also is there any things I should look out for as far as...
  3. 94-98 7.3L Problem Forum
    This isn’t a normal situation. I put new u joints on my front driveshaft, then installed it with the slip yoke on the transfer case side which is opposite of what it was before. The slip yoke boot clamps ended up catching some wires and ripped all of my 4x4 wires and other stuff. Only concerned...
  4. 94-99 7.3 Mod Help
    E4od with 320k on it has finally :poop: the bed. Been looking at rebuilding, looking at reman, considered rebuilding myself and looking at built autos but can’t make up my mind on how much money I can/want to spend. I’ve seen forums here and there about the zf5 swap and thought I’d come for some...
  5. 94-98 7.3L General Powerstroke Discussion
    Okay, so I'll start with this, I have no idea what I'm doing, but I hate my E4OD so it's got to go... I've done automatic swaps before, but the idea of swapping to a manual confuses me... I know the basics of manual transmissions, but I've never touched a ZF5 before or done a clutch change, so...
  6. 94-98 7.3L General Powerstroke Discussion
    OK, I am trying to round everything up I need to do my zf5 swap. I have the transmission, cross member, clutch, solid flywheel, shifter handle, transfer-case linkage, clutch/brake pedal assembly, steering column, slave cylinder, line, and reservoir... Now, the donor truck is a 1990 f-350 rclb...
  7. 94-98 7.3L General Powerstroke Discussion
    I want to put a zf5 in my truck. I found two out of idis, one 2x4 and the other 4x4. My truck is 4x4 which I would need. Do the idi zf5s fit on a 7.3 powerstroke? Also, what would be needed to convert a 2x4 into a 4x4?
  8. Performance & Drivetrain Parts
    I'm considering doing a zf5 swap, and my trans now has about 50k on it. Jasper rebuild with a shift kit. What are these going for any any offers will be entertained.
  9. Performance & Drivetrain Parts
    6 Shifter knobs- $30 each plus shipping.FIRM!! Billet aluminum, the eBay seller that I bought the aluminum bar, said it was 6061-T6. No way to confirm. The dimensions are- 2.245" +/-.005 O.D. X 2.250" long and weigh .65lbs. With 3/8-16 stainless set screw. Held onto the shifter rod by the...
  10. 94-98 7.3L Performance Parts
    hopefully someone out there has an answer for me, i have a zf5 currently, will the zf6 out of a 99-06 bolt up? any suggestions on how to do this right?
  11. Performance & Drivetrain Parts
    Looking for a cheap extension housing for a zf5-s42 4x4. or 1307, Im in the Chicago area.
  12. 94-98 7.3L General Powerstroke Discussion
    Whats up fellow strokers, I cant seem to find a straight answer on converting a 2wd zf5 to a 4wd. Do i have to change the mainshaft and the tail shaft or just the tailshaft and housing?:dunno::icon_ford:
  13. 94-98 7.3L General Powerstroke Discussion
    okay so im about to rebuild my zf5 in my 97 Powerstroke and i am pretty sure somewhere on the site i saw something about a quick shift kit for the manual? it was a few months ago and ive been looking for the thread and can not find it. Maybe im an idiot and there is no such thing lol But if...
1-13 of 13 Results